Beamsplitter is widely used in the image science, laser measurement industry etc. It is an optical device that splits a beam of light in two. In its most common form: cube, CPG provides a full solution of your needs. based on our precision quality control of the prisms and professional experiences in use of glue or optical contact methods, we helped our valued customer to overcome the market more than before.

With different material and different coatings, CPG optics can provide a range of products, such as: PBS, WBS, NWBS, NPBS, LWPBS, SWPBS etc. CPG optics also provide the services: design new, optimize or NRE exiting products etc.

Still, we can use only one piece of coating windows to control the light. Usually we use an aluminum layer with the thickness of the aluminum coating such that part, typically half, of light incident at a 45-degree angle is transmitted, and the remainder reflected. Beyond a metallic coating, we also apply a dielectric optical coating, in this way, we can help our customer to set up their laser systems etc. We also provide pellicle mirror for our photography customers.

CPG optics also provide different sizes of the beam splitter, we can handle 0.2mm to 200mm.

Materials we already used: optical glass, birefringent materials, even some plastics.

Typical Specification

Param NameParam Value
MaterialBK7, Fused Silica, Calcite, YVO4 etc
Flatness1/4 @ 632.8 nm per 25mm or better
Extinction Ratio> 10000:1(may change with different materials)
Beam Deviation< 3 arc seconds
Principal Transmittance> 99.9% and Ts < 0.05%(may change with different materials)
Principal ReflectanceRs > 99.5% and Rp < 0.2%(may change with different materials)
CoatingsPolarization beamsplitter coating on hypotenuse face, AR-coatings (R < 0.25%) on all input and output face.

Note: Special sizes, different split ratio and customized coating are available upon request.